|
|
|
Soluble
Feed For Cattle PFSA2
(High Acid) For
use as an additive to livestock drinking water Supplies
non-protein nitrogen, phosphorus and sulphur to ruminants FOR
USE IN ALKALINE WATER Acidic
Formula: Specially formulated to help prevent ammonia release from treated
water caused by an alkaline water source. ANALYSIS
Directions For Use: PFSA2 Special
can be fed at the general rate of 40 grams per head per day to supply the
equivalent of 29.4 g of urea, 2.7 g of phosphorus and 1 g of sulphur.
Product dilution rate is determined by the daily intake of water by the
cattle. Concentrate
Preparation: Prepare a 10%
concentrated solution by adding 10 kg of dry product in sufficient water
to make up to 100 litres of concentrate. Dosing Rate: If cattle are drinking
40 litres per head per day and the required intake of dry product is 40
grams per head per day, the proportional dosing equipment should be set at
1%. This will inject 100 ml of concentrate (containing 10 grams of
product) to 10 litres of water or 1 gram per litre of drinking water. Cattle should be
introduced to the product slowly, feeding 20 grams per head per day for
the first week and then increasing by 20 grams per head per day on a
weekly basis until the desired rate is reached. Ensure stock have ample
access to dry feed. WARNING: This product
contains urea which may be toxic, causing death, if fed in extreme
quantity or fed too quickly to cattle. Do not feed this product straight
or in dry licks. Safety Directions: Keep out of reach of
children. Avoid contact with eyes or skin. Do not inhale dust. In case of
contact with eyes or skin wash immediately with water and seek medical
advice. If swallowed, give plenty of water, do not induce vomiting,
contact a doctor or Poisons Information Centre on 131126.
Key Benefits
|
|
Send mail to tonydwood@gmail.com with questions or
comments about this web site.
|
